Can Collection
| Procedure:
Step 1- Collect the cans from the QA Food Room. Organize the cans numerically by the lab number written on the top of the can lids. |
 |
 |
Step 2-Make sure the can codes, imprinted on the lid, agree with the codes on the test sheets and the codes written on the side of the cans. If the codes do not match, change them accordingly. The lab number is written on the left of the side seam, and the cannery code is written on the right. |
Step 3- Rip the can lids off using a dull pair of nippers. Grasp the bottom of the lid and pull outward while rotating the nippers. Hammer down the sharp edge that remains with the nippers. |
 |
 |